ROUTER RIP
Konfigurasi Pada Pc Ahmad
Klik dua kali logo pc lalu pilih Dekstop >> Pilih configurasi IP lalu isikan :
Ip : 192.168.2.1
Network :255.255.255.0
Getway : 192.168.2.100
Konfigurasi pada Swicth S.Ahmad
Switch>en
Switch#conf terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#host
Switch(config)#hostname S.Ahmad
S.Ahmad(config)#
Konfigurasi Pada Router RAhmad
Router>en
Router#conf te
Router#conf terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fastEthernet 0/0
Router(config-if)#ip address 192.168.2.100 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#int serial 3/0
Router(config-if)#ip address 172.16.2.10 255.255.0.0
Router(config-if)#clock rate 128000
This command applies only to DCE interfaces
Router(config-if)#no shutdown
Router(config)#int se2/0
Router(config-if)#ip addr
Router(config-if)#ip address 172.1.2.20 255.255.0.0
Router(config-if)#clock rate 128000
This command applies only to DCE interfaces
Router(config-if)#no shutdown
Router(config)#router rip
Router(config-router)#network 192.168.2.0
Router(config-router)#network 172.16.0.0
Router(config-router)#network 172.1.0.0
Router(config-router)#network 172.6.0.0
Router(config-router)#network 10.0.0.0
Router(config-router)#end
Konfigurasi Pada Pc Mukhlisin
Klik dua kali logo pc lalu pilih Dekstop >> Pilih configurasi IP lalu isikan :
Ip : 10.10.2.1
Network :255.0.0.0
Getway : 10.10.2.100
Konfigurasi Pada Switch SMukhlisin
Switch>en
Switch#conf terminal
Switch(config)#hostname SMukhlisin
Konfigurasi Pada Router RMukhlisin
Router>en
Router#conf terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip address 10.10.2.100 255.0.0.0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to
up
%LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config-if)#interface Serial3/0
Router(config-if)#ip address 172.16.2.20 255.255.0.0
Router(config-if)#clock rate 128000
Router(config-if)#no shutdown
Router(config-if)#int se2/0
Router(config-if)#ip address 172.6.2.40 255.255.0.0
Router(config-if)#clock rate 128000
This command applies only to DCE interfaces
Router(config-if)#no shutdown
Router(config)#router rip
Router(config-router)#network 192.168.2.0
Router(config-router)#network 172.16.0.0
Router(config-router)#network 172.1.0.0
Router(config-router)#network 172.6.0.0
Router(config-router)#network 10.0.0.0
Router(config-router)#end
Konfigurasi Pada Router RNur
Router(config)#int se2/0
Router(config-if)#ip address 172.1.2.30 255.255.0.0
Router(config-if)#clock rate 128000
Router(config-if)#no shutdown
Router(config)#int se3/0
Router(config-if)#ip address 172.6.2.50 255.255.0.0
Router(config-if)#clock rate 128000
Router(config-if)#no shutdown
Router(config)#router rip
Router(config-router)#network 192.168.2.0
Router(config-router)#network 172.16.0.0
Router(config-router)#network 172.1.0.0
Router(config-router)#network 172.6.0.0
Router(config-router)#network 10.0.0.0
Router(config-router)#end
0 komentar:
Posting Komentar